Friday after work I was able to move around some clecos and finish drilling the right wing. I match drilled the bottom in about an hour. Now time for deburring and dimpling as things move on.
Somewhere along the way I read on a site that marking the clecos original hole makes it easier when you go to move them around after the first series of drilling. You can see in the photo that I use this trick and it is very helpful. Just put a tick next to the cleco, then drill all open holes. Move the cleco, then drill the holes wtih the ticks next to them. Works good and makes it so you don't miss a hole.
Bekah is happy to see her wing labeled so there is no mistake..
Post a Comment