Search This Blog

Tuesday, May 12, 2009

Match Drilling Left Stabilizer

No pics because it looks about the same, but I was able to spend about 2.5 hours in the shop last night and match drill the rest of the left Horizontal Stabilizer. Whats next is the same process on the right side, then dimpling all the rivet holes, cleaning the metal, Scotchbrite roughing of all metal surfaces, alumiprep to clean, then priming, and finally I will get to rivet it together. Going to use PPG Epoxy 2 part primer, at least to start.. We will see how complicated that gets, but for now I am going this route.

No comments:

Post a Comment

Places we have been in our RV-7 ! (Blue 2013, Yellow 2014, Green 2015, Purple 2016, Red 2017)