Additional Fixtures

Today I did more work on getting everything built out so that later on down the road things will go faster. I built my "press brake" for bending the Elevator skins, and as well built out my priming table. Still not 100% sure how I will prime, but I am getting closer to figuring it out and do know that I will use a table such as the one in this pic. Also, I am building a table for the DRDT-2 Dimpler, but using my own design and hoping for the best. If it works, I will do another write up on it in a separate post, if not, you will probably never hear about it again. ;-)