I received the firewall forward kit from Vans. I basically ordered the standard kit for the IO-360 with Horizontal induction, but pulled the Governor, Oil Cooler, Alternator, Exhaust and a few other small dollar items out since I am going somewhat custom on these items.. This cut the cost in half and of course made it possible to ship in a much smaller container. The kit has much of the fuel/oil line and mounting items for the engine. Also the battery tray which is the first thing I put together. I also did some additional wire runs for the Aileron Trim, and as well started to look at the Starter and Master solenoid.. These will be mounted to the firewall in the next couple days.